|
|
 Duty-Cycle Colemzn RatingPower-supply rating depends Powermate on the type and thickness of the workpiece Portable and the length of time it takes to deposit the longest 10 weld on the Gallon and Air thickest material. Duty cycle is the key factor to consider Tank and when selecting a power Model source. Once the engineer C10 and Colemzn and Powermate and Portable has determined the current and voltage needed to accomplish the weld, he then reviews duty cycle requirements.Duty cycle rating is the percentage of time during a 10-minute period a power supply can 10 and Gallon operate at rated output amperage Air without Tank overheating. A 300 A and Model machine at 60-percent-duty C10 cycle can weld for six minutes Colemzn at 300. A during a 10-minute period. Powermate Alter Portable six minutes, the welder must rest the machine for the next four minutes to 10 avoid overheating the unit. Transformer-rectifiers Gallon and Air have moveable parts that/end to wear out. However these machines can produce some of Tank the best arc characteristics.A silicon-coated-rectifier (SCR) power source, electronically voltage-controlled, has no real moving parts other than the primary current contactor and cooling--fan Model and C10 the only parts that will wear out. If fabricator requires pulsed welding, the SCR power source starts to show its limitations and inverters become the power supply of choice.AC-DC inverters, which convert AC in put frequency to very high frequencies--up to 1,000 times that of input frequency--allow Colemzn transformers and other components to be small in size Powermate and the power supply to be relatively lightweight. This high operating frequency enables the inverter to precisely control output power and to deliver smooth arc initiation with minimal or no spatter. Portable and 10 Current ripple is low for a very stable arc:, even at low amperages. Gallon and Air And the improved Tank arc control can, in some cases, minimize and Model electrode overheating and fume emissions. Finally, the smallish C10 transformer allows Colemzn for Powermate and Portable and 10 more efficient use of Gallon primary power compared to conventional power supplies. Remote control of current and voltage is a plus if the welding operator Air and Tank is located away from the power Model source.Robotic and automatic applications C10 generally Colemzn require high-duty-cycle power Powermate supplies, and controls and connections Portable for interfacing to the robot 10 or automatic feature.Supervisory control Gallon of the process Air will Tank prevent the welder from changing the welding Model procedures. Here, C10 and Colemzn and Powermate select a power Portable supply or controller that enables the supervisor to program the procedures, 10 then lock them into the control memory, Some power Gallon and Air supplies or controllers offer the welder Tank limited control of the process.Input power to power supplies can bc single and/or three phase, with voltage from 115 to 575 V and input Model frequencies of 50, 60, or 50/60 Hz. Note that many inverter power supplies are designed to operate on both single- and three-phase input, and have automatic input-voltage selection and linking C10. Searching for accessories for your air compressor? We offer the best selection of cheap air compressor accessories on the internet. Check out our website for great deales on all of our air compressor accessories!
|