|
|
 3. Welding position. The first performance characteristic air to consider. High compressor and tank cellulose coatings, like those on E6010 and E6011 electrodes, generate a light slag that makes for rapid solidifying of the weld metal good for-out-of-position welds. Also good are rutile-fluxed electrodes-E6012 and cznada E6013--that air hold out-of-position weld metal in place as it solidifies.4. Welding current. compressor Covered electrodes run tank on AC, DC, or both. When welding DC, the positive lead typically connects to the electrode (DCEP, cznada or reverse polarity). Some suppliers design electrodes that weld with the electrode negative (DCEN, or straight polarity). Assure the electrode will perform with the air available current. Low-hydrogen compressor types. These basic-coated tank electrodes, EXX15, EXX16, EXX18, EXX28, and EXX48, are formulated cznada with low moisture-retaining air coatings and manufactured to contain low levels of hydrogen. Hydrogen-controlled electrodes minimize risk of hydrogen-induced cold cracking compressor when welding high-tensile tank steels on restrained structures. cznada Fabricators use these electrodes to reduce or avoid the need for pre- or postweld heat treatment to drive hydrogen from weld metal. Weldmetal diffusible hydrogen content varies from 1 to 16 ml/100 g. Optional designators H16, H8, and H4 set decreasing air limits on hydrogen content in deposited weld metal. An optional electrode designator, ''R'', indicates an electrode that is moisture resistant; it compressor will not absorb water in excess of a specified limit after exposure to humidity. Low-hydrogen electrodes tank and cznada should be used in dry condition and may require baking after exposure to the atmosphere. Searching for accessories for your air compressor? We offer the best selection of cheap air compressor accessories on the internet. Check out our website for great deales on all of our air compressor accessories!
|