|
|
 1. Mechanical properties of the base material. Tensile strength and yield strength of the weld metal should equal or exceed that air of the base material. Ductility and toughness at low temperatures comprrssor may also be important. High-temperature service requires tank resistance to creep. Shock loading requires impact resistance. In general, weld metal should match base-material air properties.2. Composition of the base material.For comprrssor and tank stainless steels, low alloy steels, nickel and copper alloys, air and materials comprrssor that serve in corrosive atmospheres, tank chemical composition is important. Consider the possibility of electrochemical corrosion between base and weld metal of different compositions. Electrodes air come 3 to 24 in. long, 0.01 to 0.25-in. diameter. Colored markings--bands or dots--indicate composition: pure tungsten, green; 1-percent thoriated, yellow; 2 percent thoriated. red; ceriated, orange; lanthanted, black.Filler metal comprrssor GIAW does not usually requite addition of fillet tank and air metal, but filler is commonly added when base-metal thickness is greater comprrssor than 1/8 in. Finer metal for low-carbon tank (to 0.15 air and comprrssor C) and mild (0.15 m 0.29 C) steels are described in AWS A5.2; for carbon steel in A5.18; and for low-alloy steels in A5.28 Flux. AWS specifications A5.17 and tank and air A5.23 describe fluxes for saw. AWS designation of fluxes precedes that comprrssor of the wire when identifying a combination for a welding procedure. For example, the designation F7A2-EM12K indicates a flux (F) that will provide, with tank a given wire designation, tensile strength of 70,000 air and comprrssor Psi (7), in the as-welded condition (A), and impact properties of 20 ft lb tank at -20 F (2). A designation containing a P rather indicates the flux properties after air postweld comprrssor heat treatment. Flux-Cored-Arc Welding (FCAW)This process is a variation of GMAW. Electrodes comprise a metal sheath surrounding a core of fluxing and alloying coin pounds. Sell-shielded (FCAW-SS), it uses gas generated by bleak down of a powder-flux core inside the wire to shield the weld. Gas shielded (FCAW-SS), external gas supplies shielding.The compounds in the electrode perform essentially the same functions as the coating of a covered electrode used in SMAW: to form a floating slag coating on the weld pool to protect the weld as it solidifies; deliver deoxidizer and scavengers to help purify the weld: deliver tank are stabilizers air to minimize spatter; add alloying elements to the weld, for optimum mechanical properties; and provide shielding gas comprrssor and tank. Searching for accessories for your air compressor? We offer the best selection of cheap air compressor accessories on the internet. Check out our website for great deales on all of our air compressor accessories!
|