|
Searching for accessories for your air compressor? We offer the best selection of cheap air compressor accessories on the internet. Check out our website for great deales on all of our air compressor accessories! - Enter here
|
|
|
 Duty-Cycle RatingPower-supply airclmpressorkits rating depends on the type and thickness airclmpressorkits and airclmpressorkits of the workpiece and the length of time it takes to deposit the longest airclmpressorkits weld on the thickest material. Duty cycle is the key factor to consider airclmpressorkits when selecting a power source. Once the engineer has determined the current and voltage needed to accomplish the weld, he then reviews duty cycle requirements.Duty cycle rating is the percentage of time during a 10-minute airclmpressorkits period a power supply can operate at rated output amperage without overheating. A 300 A machine at 60-percent-duty cycle can weld for six minutes at 300. A during a 10-minute period. Alter six minutes, the welder airclmpressorkits must rest the machine for the next four minutes to avoid overheating the unit. 3. Welding position. The first performance characteristic to consider. High cellulose coatings, like those on E6010 and E6011 electrodes, generate a light slag that makes for rapid solidifying of the weld metal good for-out-of-position airclmpressorkits welds. Also good are rutile-fluxed electrodes-E6012 and E6013--that hold out-of-position weld metal in place as it solidifies.4. Welding current. Covered electrodes run on AC, DC, or both. When welding DC, the positive lead typically connects to the electrode (DCEP, or reverse polarity). Some suppliers design electrodes that weld with the electrode negative (DCEN, or straight polarity). Assure the electrode will perform with the available current. Searching for accessories for your air compressor? We offer the best selection of cheap air compressor accessories on the internet. Check out our website for great deales on all of our air compressor accessories!
|