|
|
 Production vs. repair applications In general, production applications require high-duty-cycle power supplies, and repair applications can use low-duty-cycle portable units.Lift-arc GTAW Many DC power supplies are equipped with a list-start feature for, a variation of scratch starting, GTAW welding. When the welder touches the tungsten electrode to the workpiece, a small amount of current--15-20 A--flows. When he lifts the electrode from the work, the arc starts softly and the machine switches to the set aircomoressoradd2ndtank weld-current value. This low-current starting minimizes weld aircomoressoradd2ndtank contamination caused by touching the aircomoressoradd2ndtank tungsten to the workpiece aircomoressoradd2ndtank and eliminates the need for high-frequency starting. Remote control of current and voltage is a plus if the welding operator is located away from the power source.Robotic and automatic aircomoressoradd2ndtank applications generally require high-duty-cycle power supplies, and controls and connections for interfacing to the robot or automatic feature.Supervisory control of the process will prevent the welder from changing the welding procedures. Here, select a power supply or controller that enables the supervisor to aircomoressoradd2ndtank program the procedures, then lock them into the control memory, Some power supplies or controllers aircomoressoradd2ndtank offer the welder limited control of the process.Input power to power supplies can bc single and/or three phase, with voltage from 115 to 575 V and input frequencies of 50, 60, or 50/60 Hz. Note that many inverter power supplies are designed to operate on both single- and three-phase input, and have automatic input-voltage selection and linking. Filler-metal selection for FCAW depends on base-metal composition, cleanliness of base metal, thickness, a0d service. AWS specifications: A5.20, Specification for Carbon Steel Electrodes for Flux-cored Arc Welding, for low-carbon steel up to 0.15 C and mild steel 0.15 to 0.29 C; A5.29, Specification for Low Alley Electrodes for Flux-cored Arc Welding, for steel of higher carbon content and the low-alloy types; A5.22, Specification for Flux-cored Corrosion-Resisting Chromium and Chromium-Nickel Steel Electrodes, for stainless steels.Gas-Tungsten-Arc Welding (GTAW, TIG)GTAW rises aircomoressoradd2ndtank an arc between a nonconsumable electrode and the aircomoressoradd2ndtank work. It joins with or without filler metal. AWS A5.12 lists electrode types and sizes. All are tungsten, some with thoria, zirconia, ceria, or lanthana added. Thoria provides higher current-carrying capacity than prime aircomoressoradd2ndtank tungsten with less contamination of the weld pool. Other benefits: better arc start, greater arc stability. Zirconiated electrodes perform well with alternating current: the arc is stable, the electrode retains a (tailed end during welding, and has current-carrying capacity of thoriated electrodes. Zirconiated electrodes resist contamination and minimize tungsten contamination of weld metal. Searching for accessories for your air compressor? We offer the best selection of cheap air compressor accessories on the internet. Check out our website for great deales on all of our air compressor accessories!
|