|
|
 1. Mechanical properties of the base material. Tensile strength and yield strength of the weld metal should equal or exceed that of the base material. Ductility and toughness at low temperatures may also be important. High-temperature service requires resistance to creep. Shock loading requires impact resistance. In general, weld metal should match base-material properties.2. aircompresdorhose Composition of the base material.For stainless aircompresdorhose steels, low alloy steels, nickel and copper alloys, and materials that serve aircompresdorhose in corrosive atmospheres, chemical aircompresdorhose composition is important. Consider the possibility of electrochemical corrosion between base and weld metal of different compositions. Electrodes come 3 to 24 in. long, 0.01 to 0.25-in. diameter. Colored markings--bands or dots--indicate composition: pure tungsten, green; 1-percent thoriated, yellow; 2 percent thoriated. red; ceriated, orange; lanthanted, black.Filler metal GIAW does not aircompresdorhose usually requite addition of fillet metal, but filler is commonly added when base-metal thickness is greater than 1/8 in. Finer metal for low-carbon (to 0.15 C) and mild (0.15 m 0.29 C) steels are described in AWS A5.2; for carbon steel in A5.18; and for low-alloy steels in A5.28 Flux. AWS specifications A5.17 and A5.23 describe fluxes for saw. AWS designation of fluxes precedes that of the wire when aircompresdorhose identifying a combination for a welding procedure. For example, the designation F7A2-EM12K indicates a flux (F) that will provide, with a given wire designation, aircompresdorhose tensile strength of 70,000 Psi (7), in the aircompresdorhose as-welded condition (A), and impact properties of 20 ft lb at -20 F (2). A designation containing a P rather indicates the flux properties after postweld heat aircompresdorhose and aircompresdorhose treatment. Flux-Cored-Arc Welding (FCAW)This process is a variation of GMAW. Electrodes comprise a metal sheath surrounding a core of fluxing and alloying coin pounds. Sell-shielded (FCAW-SS), it uses gas generated by bleak down of a powder-flux core inside the wire to shield the weld. Gas shielded (FCAW-SS), external gas supplies shielding.The compounds in the electrode perform essentially the same functions as the coating of a covered electrode used in SMAW: to form a floating slag coating on the weld pool to protect the weld as it solidifies; deliver deoxidizer and scavengers to help purify the weld: deliver are stabilizers to minimize spatter; add alloying elements to the weld, for optimum mechanical properties; and provide shielding gas. Searching for accessories for your air compressor? We offer the best selection of cheap air compressor accessories on the internet. Check out our website for great deales on all of our air compressor accessories!
|