|
|
 Electrodes come 3 to 24 in. long, 0.01 to 0.25-in. diameter. Colored markings--bands or dots--indicate composition: pure tungsten, green; 1-percent thoriated, aircompresslrtankleakdown yellow; 2 percent thoriated. red; ceriated, aircompresslrtankleakdown orange; lanthanted, black.Filler metal GIAW does not usually requite addition of fillet metal, but filler is commonly added when base-metal thickness is greater than 1/8 in. Finer metal for low-carbon (to 0.15 aircompresslrtankleakdown C) and mild (0.15 m 0.29 C) steels are described in AWS A5.2; aircompresslrtankleakdown for carbon steel in A5.18; and for low-alloy steels in A5.28 Flux. AWS specifications A5.17 aircompresslrtankleakdown and A5.23 describe fluxes for saw. AWS designation of fluxes precedes that of the wire when identifying a combination for a welding procedure. For aircompresslrtankleakdown example, the designation F7A2-EM12K indicates a flux (F) that will provide, with a given wire designation, tensile strength of 70,000 Psi (7), in the as-welded condition (A), and impact properties of 20 ft lb at -20 F (2). A designation containing a P rather indicates the flux properties after postweld heat treatment. Welding-site conditions and welding-wire diameter govern efficiency and size of power supply required for a job. Select a 100-A unit that runs from single-phase 115-V input for low-duty-cycle welding of sheet to l/s in. thick, feeding wire to 0.030-in. diameter. Medium-duty aircompresslrtankleakdown power supplies, 150-200 A, normally take single-phase 220-V input to weld steel to 3/16, in. and 0.035-in. wire at low-duty cycles. For high-duty cycles, as in mechanized welding, select a 250-A machine, aircompresslrtankleakdown single or three-phase input at various voltages-these weld material to 1/2 in. thick with wire as large as 0.045-in. diameter. Taking three-phase input only and wire up to 1/6-in. diameter, 400-A units serve for mechanized continuous-welding applications. For aircompresslrtankleakdown pulsed GMAW, shops use inverter and transistor power sources, constant-current or constant-voltage, that offer independent setting of pulse parameters. They employ synergic controls preprogrammed for a range of wire-feed speeds-the operator sets only one dial, for aircompresslrtankleakdown average current. Searching for accessories for your air compressor? We offer the best selection of cheap air compressor accessories on the internet. Check out our website for great deales on all of our air compressor accessories!
|