|
|
 A diesel-powered, high-pressure air compressor is rated at 1,100 cfm and has a pressure range from 150 to 350 psi. The self-contained, 100% oil-free compressor has a "save all" base that eliminates fuel spills and oil leaks, making it one of the most environmentally friendly high-pressure units available. The diesel-driven engine stays well within the boundaries of the EPA and CARB emissions regulations. aircompresslrtanks A complete line of accessories for the compressor is also available, ranging from aftercoolers to --40[degrees]F desiccant dryers and filters. Air compressor manufacturer, P.K. Lindsay, Deerfield, N.H., has been sold to American Eagle Accessories Group, Garner, la., a division of Stellar Industries Inc. The Lindsay air compressors are sold under the Lindsay and E.L. aircompresslrtanks Smith brand names. All Lindsay compressor assets have been moved to American Eagle''s Garner aircompresslrtanks plant and resumed full production. American Eagle is also a distributor of various truck-related accessories. According to the company, the FRL series of compressed air filters, regulators, lubricators, and manual control valves provides efficient moisture and contaminant removal, accurate pressure regulation, and precision lubrication for all air-operated equipment applications. All of the components in the series are available individually or in combination units. According to the company, aircompresslrtanks its compressed-air productivity tools cut energy costs by as much as 70%, while reducing the compressor burden and shop noise levels. A 24-pg application manual shows bow these accessories provide solutions to spot chilling (to -40[degrees]F), dry machining, blow-off, control cooling, air conveying, static, liquid transfer, and spill pick-up. The products meet OSHA noise and dead-end pressure requirements. Welding shops require many types of equipment, including power supplies, guns, torches, wire feeders, flux-handling devices, and accessories such as cables and ground clamps, as well as consumables-filler metals, fluxes, and shielding gases. For brazing, shops employ aircompresslrtanks furnaces and custom-built fixtures. With the advent of the CE-mark requirements in Europe, many aircompresslrtanks manufacturers now design to the International Standard IEC 974-1. One of the requirements of this standard is to place an IP rating on the nameplate of the machine to indicate the degree of protection provided by the aircompresslrtanks enclosure to avoid damage from water and foreign objects.Purchasers of power supplies must consider the power they will be putting into the machines which operate from line power or some other .source of electricity. Ratings list voltage, number of phases, frequency, and current level when the power source is running at rated output. Most motor-generator sets require three-phase AC power. Weld wire. SAW uses electrodes of continuous wire, solid or flux- or metal-cored. Selection depends on base-metal composition and thickness, flux, joint design, and cleanliness. AWS specifications A5. 17 and A5.23 detail filler materials for SAW of carbon and low-alloy steels; A5.9 and A5.1, filler metals weld corrosion-resisting stainless steels and nickel alloys, respectively.Hardfacing ElectrodesHardfacing welds a wear-resistant material to a substrate-base material that is commonly mild, alloy, or stainless steel. Hardfacings can be deposited manually using SMAW electrodes; semiautomaticaly using solid wire and self shielded flux cored electrodes; or automatically aircompresslrtanks by submerged-arc welding. The method chosen depends on the size and accessibility of the area to be surfaced. Searching for accessories for your air compressor? We offer the best selection of cheap air compressor accessories on the internet. Check out our website for great deales on all of our air compressor accessories!
|