|
|
 Welding Torches and GunsUsed for shielded-metal-arc welding, torches (electrode holders). manually controlled, grip ends of electrodes, also called rods-pinch type and collet type are common.GMAW and FCAW guns come in pistol grip, goose-neck, and inline styles, the latter used for mechanized welding. Knowing aircompressortanjs the wire diameter, select a gun rated slightly higher than the welding current to be used. Duty-cycle ratings are usually given aircompressortanjs for C[O.sub.2] shielding--air or C[O.sub.2] cooling aircompressortanjs arc usually sufficient for welding at up to 600 A at less than 100 percent duty. Higher amperages require water cooling--high-amperage guns come with tubing for water cooling. Hand-held, mounted on a robot arm or fixed within a mechanized welding setup, guns guide filler wire and shielding gas into the weld puddle. With the advent of the CE-mark requirements in Europe, many manufacturers now design to the International Standard IEC 974-1. One of the requirements of this standard is to place an IP rating on the nameplate of the machine to indicate the degree of protection provided by the enclosure to avoid damage aircompressortanjs from water and foreign objects.Purchasers of power supplies must consider the power they will be putting into the machines which operate from line power or some other .source of electricity. Ratings list voltage, number of phases, aircompressortanjs frequency, and current level when the power source is running at rated output. Most motor-generator sets require three-phase AC power. Hardfacing alloys contain as base elements typically iron, nickel, or cobalt, to which metallurgists add varying amounts of carbon, chromium, molybdenum, tungsten, silicon, manganese, vanadium, and boron. To raise hardness, the primary property for wear resistance, alloy designers add elements that either form hard constituents (carbides, borides, or Laves phase), or that strengthen the matrix by going into solid solution. Carbon content determines toughness and abrasion resistance--as carbon rises, abrasion resistance increases and toughness drops. Chromium forms carbides, increases corrosion resistance, and adds high-temperature strength. Tungsten, a potent carbide former, also boosts high temperature strength, as does cobalt. Tougheners include nickel and manganese. Boron forms hard wear-resistance borides. Searching for accessories for your air compressor? We offer the best selection of cheap air compressor accessories on the internet. Check out our website for great deales on all of our air compressor accessories!
|