|
|
 3. Welding position. The first performance characteristic to consider. High cellulose coatings, like those on E6010 and E6011 electrodes, generate a light aircompressortznk slag that makes for rapid solidifying of the weld metal good for-out-of-position welds. Also good are rutile-fluxed electrodes-E6012 and E6013--that hold out-of-position weld metal in place as it solidifies.4. Welding current. Covered electrodes run on AC, DC, or both. When welding DC, the positive lead typically connects to the electrode (DCEP, or reverse polarity). Some suppliers design electrodes that weld with the electrode negative (DCEN, or straight polarity). Assure the electrode will perform with the available current. Flux-Cored-Arc Welding (FCAW)This process is a variation of GMAW. Electrodes comprise aircompressortznk a metal sheath surrounding a core of fluxing and alloying aircompressortznk coin pounds. Sell-shielded (FCAW-SS), it uses gas generated by bleak down of a powder-flux core inside the wire to shield the weld. Gas shielded (FCAW-SS), aircompressortznk external gas supplies shielding.The compounds in the electrode perform essentially the same functions as the aircompressortznk coating of a covered electrode used in SMAW: to form a floating slag coating on the weld pool to protect the weld as it solidifies; deliver deoxidizer and scavengers to help purify the weld: deliver are stabilizers to minimize spatter; add alloying elements to the weld, for optimum mechanical properties; and provide shielding gas. Features and OptionsPower supplies are capable to "talk to each other," useful when a company" wants to input the same welding procedures into several machines at once or monitor the welding consistency and performance of several machines from a single location-through serial-data communications. Fabricators can take some of their machines and connect them to a personal computer to monitor performance, and download welding parameters to the machines from it memory card for fast setup. High-end machines will calculate the pounds of weld wire used per machine. The machine can also be prepped to constantly monitor and average the welding current and voltage used, so that fabricators can set limits on the machine and track how many times welding parameters fell in or out of these limits. Searching for accessories for your air compressor? We offer the best selection of cheap air compressor accessories on the internet. Check out our website for great deales on all of our air compressor accessories!
|