 A diesel-powered, high-pressure air compressor is rated at 1,100 cfm and has a pressure range from 150 to 350 psi. The self-contained, 100% oil-free compressor has a "save all" base that eliminates fuel spills and oil leaks, making it one of the most environmentally friendly high-pressure units available. The diesel-driven engine stays well within the boundaries of the EPA and CARB emissions regulations. A complete line of accessories for the compressor is also available, ranging from aftercoolers to --40[degrees]F desiccant dryers and filters. Air compressor manufacturer, P.K. Lindsay, Deerfield, aircomptessorkit N.H., has been sold to American Eagle Accessories Group, Garner, la., a division of Stellar Industries Inc. The Lindsay air compressors are sold under the Lindsay and E.L. Smith brand names. All Lindsay compressor assets have been moved to American Eagle''s Garner plant and resumed full production. American Eagle is also a distributor of various truck-related accessories. According to the company, the FRL series of compressed aircomptessorkit and aircomptessorkit air filters, regulators, lubricators, and manual control valves provides efficient moisture and contaminant removal, accurate pressure regulation, and precision lubrication for all air-operated equipment applications. All of the components in the series are available individually or in combination aircomptessorkit units. According to the company, its compressed-air productivity tools cut energy costs by as much as 70%, while reducing the compressor burden and shop noise levels. A 24-pg application manual shows bow these accessories provide solutions to spot chilling (to -40[degrees]F), dry machining, aircomptessorkit blow-off, control cooling, air conveying, static, liquid transfer, and spill pick-up. aircomptessorkit The products meet OSHA noise and dead-end pressure requirements. Welding shops require many types of equipment, including power supplies, guns, torches, wire feeders, flux-handling devices, aircomptessorkit and accessories such as cables and ground clamps, as well as consumables-filler metals, fluxes, and shielding gases. For brazing, shops employ furnaces and custom-built fixtures. Welding-site conditions and welding-wire diameter govern efficiency and size of power supply required for a job. Select a 100-A unit that runs from single-phase 115-V input for low-duty-cycle welding of sheet to l/s in. thick, feeding wire to 0.030-in. diameter. Medium-duty power supplies, 150-200 A, normally take single-phase 220-V input to weld steel to 3/16, in. and 0.035-in. wire at low-duty cycles. For high-duty cycles, as in mechanized welding, select a 250-A machine, single or three-phase input at various voltages-these weld material to 1/2 in. thick with wire as large as 0.045-in. diameter. Taking three-phase input only and wire up to 1/6-in. diameter, 400-A units serve for mechanized continuous-welding applications. For pulsed aircomptessorkit GMAW, shops use inverter and transistor power sources, constant-current or constant-voltage, that offer independent setting of pulse parameters. They employ synergic controls preprogrammed for a range of wire-feed speeds-the operator sets only one dial, for average current. Searching for accessories for your air compressor? We offer the best selection of cheap air compressor accessories on the internet. Check out our website for great deales on all of our air compressor accessories!
|