|
|
 Weld wire. SAW uses electrodes of continuous wire, solid or flux- or metal-cored. Selection depends on base-metal composition and thickness, flux, joint design, and cleanliness. AWS specifications A5. 17 and A5.23 detail filler materials for SAW of carbon and low-alloy steels; A5.9 and A5.1, filler metals weld corrosion-resisting stainless steels and nickel alloys, respectively.Hardfacing ElectrodesHardfacing welds a wear-resistant material to a substrate-base material that is commonly mild, alloy, or stainless steel. Hardfacings can be deposited manually using SMAW electrodes; semiautomaticaly using solid wire and self shielded flux cored electrodes; aircpmpressorhoses or automatically by submerged-arc welding. The method chosen depends on the size and accessibility of the area to be surfaced. For aircpmpressorhoses flux-cored-arc welding, shops use CV or CC types, 300 to 1,500 A, 25 to 50 V, rated 60- to 100-percent-duty cycle. CV types are more popular because wire-feed speed, set before welding, controls welding current. Cc types require a variable-speed or voltage-sensing wire feeder.Gas-tungsten-arc welding (GTAW) aircpmpressorhoses requires a constant-current (AC or DC) power supply aircpmpressorhoses with a steep volt-amp curve to minimize current change for variation in aircpmpressorhoses voltage or arc length. They come rated to 1,500 A, 10 to 75 V, at 40- to 100-percent-duty cycle. Most GTAW power supplies come equipped with high-frequency circuitry for arc initiation and stabilization, gas valves, and cooling-water valves for high-current welding. High-frequency arc start is useful when the maximum open-circuit voltage allowed by NEMA standards, 80 to 100 V, aircpmpressorhoses will not establish and maintain a stable arc. Searching for accessories for your air compressor? We offer the best selection of cheap air compressor accessories on the internet. Check out our website for great deales on all of our air compressor accessories!
|