|
|
 Flux-Cored-Arc Welding (FCAW)This process is a variation of GMAW. Electrodes comprise a metal sheath surrounding a core of fluxing and alloying coin pounds. Sell-shielded (FCAW-SS), it uses gas generated by bleak down of a powder-flux core inside the wire to shield the weld. Gas shielded (FCAW-SS), external gas supplies shielding.The compounds in the electrode perform essentially the same functions as the coating of a covered electrode used in SMAW: to form a floating slag coating on the weld pool to protect the weld as it solidifies; deliver deoxidizer and scavengers to help purify the weld: deliver are stabilizers to minimize spatter; add alloying elements to the weld, for optimum mechanical properties; and provide shielding gas. Power SuppliesWelding power supplies take alternating or direct current from a power line or portable generator and convert it to current usable at the welding arc:, Check National Electrical Manufacturers Association (NEMA) Standards Publication EW1, Electric Arc Welding Power Supplies, and manufacturers'' literature for construction and performance requirements of individual machines.Among types of power supplies, alternating-current (ac) transformers are least costly-most use 230 V single phase input power. Direct-current (DC) transformer-rectifiers convert AC to DC, using single- or three-phase power to produce constant voltage (cv) or variable voltage (vv). AC-DC transformer-rectifiers can AC and DC weld. A diesel-powered, high-pressure air compressor is rated at 1,100 cfm and has a pressure range from 150 to 350 psi. The self-contained, 100% oil-free compressor has a "save all" base that eliminates fuel spills and oil leaks, making it one of the most environmentally friendly high-pressure units available. The airrank diesel-driven engine stays well within the boundaries of the EPA and CARB emissions regulations. A complete line of accessories for the compressor is also available, airrank ranging from aftercoolers to --40[degrees]F desiccant dryers and filters. Air compressor manufacturer, P.K. Lindsay, Deerfield, N.H., has been sold to American Eagle Accessories Group, Garner, la., a division of Stellar Industries Inc. The Lindsay air compressors are sold under the Lindsay and E.L. Smith brand names. All Lindsay compressor assets have been moved to American Eagle''s Garner plant and resumed full production. American Eagle is also a distributor of various truck-related accessories. According to the company, the FRL series of compressed air filters, regulators, airrank lubricators, and manual control valves provides efficient moisture and contaminant removal, accurate pressure regulation, and precision lubrication for all air-operated equipment applications. All of the components in the series are available individually or in combination units. According to the company, its compressed-air productivity tools cut energy costs by as much as 70%, while reducing the compressor burden and shop noise levels. A 24-pg application manual shows bow these accessories provide solutions to spot chilling (to -40[degrees]F), dry machining, blow-off, control airrank cooling, air conveying, static, liquid transfer, and spill pick-up. The products meet OSHA noise and dead-end pressure requirements. Welding shops require many types of equipment, including power supplies, guns, torches, wire feeders, flux-handling devices, and accessories such airrank as cables and ground clamps, as well as consumables-filler metals, fluxes, and shielding gases. For brazing, shops employ furnaces and custom-built fixtures. Searching for accessories for your air compressor? We offer the best selection of cheap air compressor accessories on the internet. Check out our website for great deales on all of our air compressor accessories!
|