|
|
 Welding Torches and GunsUsed for shielded-metal-arc welding, torches (electrode holders). manually controlled, grip ends of electrodes, also called rods-pinch type and collet type are common.GMAW and FCAW guns come in pistol grip, goose-neck, and inline styles, the latter used for mechanized welding. Knowing the wire diameter, select a gun rated airtamks and airtamks slightly higher than the welding current to be used. Duty-cycle ratings are usually given for C[O.sub.2] shielding--air or C[O.sub.2] cooling arc usually sufficient for welding at up to 600 A at less than 100 percent duty. Higher amperages require airtamks water cooling--high-amperage guns come with tubing for water cooling. Hand-held, mounted on a robot arm or fixed within a mechanized welding setup, guns guide filler wire and shielding gas into the weld puddle. With the advent of the CE-mark requirements in Europe, many manufacturers now design to the International Standard IEC 974-1. One of the requirements of this standard is to place an IP rating on the nameplate of the machine to indicate the degree of protection provided by the enclosure to avoid damage from water and foreign objects.Purchasers of power supplies must airtamks consider the power they will be putting into the machines which operate from line power or some other .source of electricity. Ratings list voltage, number of phases, frequency, and current level when the power source is running at rated output. Most motor-generator sets require three-phase AC power. Filler-metal selection for FCAW depends on base-metal composition, cleanliness of base metal, thickness, a0d service. AWS specifications: A5.20, Specification for Carbon Steel Electrodes for Flux-cored Arc Welding, for low-carbon steel up to 0.15 C and mild steel 0.15 to 0.29 C; A5.29, Specification for Low Alley Electrodes for Flux-cored Arc Welding, for steel of higher carbon content and the low-alloy types; A5.22, Specification for Flux-cored Corrosion-Resisting Chromium and Chromium-Nickel Steel Electrodes, for stainless steels.Gas-Tungsten-Arc Welding (GTAW, TIG)GTAW rises an arc between a nonconsumable electrode airtamks and the work. airtamks It joins with or without filler metal. AWS A5.12 lists electrode types and sizes. All are tungsten, some with thoria, airtamks zirconia, ceria, or lanthana added. Thoria provides higher current-carrying capacity airtamks than prime tungsten with less contamination of the weld pool. Other benefits: better arc start, greater arc stability. Zirconiated electrodes perform well with alternating current: the arc is stable, the electrode retains a (tailed end during welding, and has current-carrying capacity of thoriated electrodes. Zirconiated electrodes resist contamination and minimize tungsten contamination of weld metal. Searching for accessories for your air compressor? We offer the best selection of cheap air compressor accessories on the internet. Check out our website for great deales on all of our air compressor accessories!
|