|
|
 Filler-metal selection for FCAW depends on base-metal composition, cleanliness of base metal, thickness, a0d service. AWS specifications: A5.20, Specification for Carbon Steel Electrodes for Flux-cored Arc Welding, for low-carbon steel up to 0.15 C and mild steel 0.15 to 0.29 C; A5.29, Specification for aitcompressorpressureswitch Low Alley aitcompressorpressureswitch Electrodes for Flux-cored Arc Welding, for steel of higher carbon content and the low-alloy types; A5.22, Specification for Flux-cored Corrosion-Resisting Chromium and Chromium-Nickel Steel Electrodes, for stainless steels.Gas-Tungsten-Arc Welding (GTAW, TIG)GTAW rises an arc between a nonconsumable electrode and the work. It joins with or without filler metal. AWS A5.12 lists electrode types and sizes. All are tungsten, aitcompressorpressureswitch some with thoria, zirconia, ceria, or lanthana added. Thoria provides higher current-carrying aitcompressorpressureswitch capacity than prime tungsten with less contamination of the weld pool. Other benefits: better arc start, greater arc stability. Zirconiated electrodes perform well with alternating current: the arc is stable, the electrode retains a (tailed end during welding, and has current-carrying capacity aitcompressorpressureswitch of thoriated electrodes. Zirconiated electrodes resist contamination and minimize tungsten contamination of weld metal. Duty-Cycle RatingPower-supply rating depends on the type and thickness of the workpiece and the length of time it takes to deposit the longest weld on the thickest material. Duty cycle is the key factor to consider when selecting a power source. Once the engineer has determined the current and voltage needed to accomplish the weld, he then reviews duty cycle requirements.Duty cycle rating is the percentage of time during a 10-minute period a power supply can operate at rated output amperage without overheating. A 300 A machine at 60-percent-duty cycle can weld for six minutes at 300. A during a 10-minute period. Alter six minutes, the welder must rest the machine for the next aitcompressorpressureswitch four minutes to avoid overheating the unit. Searching for accessories for your air compressor? We offer the best selection of cheap air compressor accessories on the internet. Check out our website for great deales on all of our air compressor accessories!
|