|
|
 Shielded-Metal-Arc Welding (SMAW, STICK)AWS (American cleaming Welding Society) A5 specifications Set standards for electronics for SMAW of air carbon, stainless, and low alloy steels; aluminum copper, and nickel and their alloys and weld-surfacing. compressor Designations for covered tank electrodes carry cleaming the prefix ''E''. Packaged to AWS specifications, electrodes come in boxes, cans, or other containers, labeled with their AWS air specification and trade name, quality control (heat or lot) number, supplier name, diameter and length, compressor and weight of contents. Specifications require that every electrode bc marked for identification near with its numeric designation the grip end.To select a covered SMAW electrode, consider these factors, in approximate order of importance. Power SuppliesWelding power supplies take tank alternating or direct current from cleaming a power line or portable generator and convert it to current usable at the welding arc:, Check National Electrical Manufacturers Association (NEMA) air Standards Publication compressor EW1, Electric Arc Welding Power Supplies, and manufacturers'' literature for construction and performance requirements of individual machines.Among tank types of power supplies, alternating-current (ac) transformers are least costly-most use 230 V single phase input power. Direct-current cleaming (DC) transformer-rectifiers convert AC to DC, using single- or three-phase power to produce constant voltage (cv) or variable voltage (vv). AC-DC transformer-rectifiers can AC and DC weld. Electrodes come 3 to 24 in. long, 0.01 to 0.25-in. diameter. Colored markings--bands or dots--indicate composition: pure tungsten, green; 1-percent thoriated, yellow; 2 percent thoriated. red; ceriated, orange; lanthanted, black.Filler air metal GIAW does not usually requite addition of fillet metal, but filler is commonly added when base-metal thickness is greater than compressor 1/8 in. Finer metal for low-carbon (to 0.15 C) and mild (0.15 m 0.29 C) steels are described in AWS A5.2; for carbon steel in A5.18; tank and for low-alloy cleaming steels in A5.28 Flux. AWS specifications A5.17 and air A5.23 describe fluxes for saw. AWS designation compressor of fluxes tank precedes that of the wire when identifying a combination for a welding procedure. For example, the designation F7A2-EM12K indicates a flux cleaming (F) that will air provide, with a given wire designation, tensile strength of 70,000 Psi (7), in the as-welded condition (A), and impact properties of 20 ft lb at -20 F (2). A designation containing a P rather compressor indicates the flux tank properties after postweld heat treatment. Searching for accessories for your air compressor? We offer the best selection of cheap air compressor accessories on the internet. Check out our website for great deales on all of our air compressor accessories!
|