|
|
 Low-hydrogen types. These basic-coated electrodes, EXX15, EXX16, EXX18, EXX28, and EXX48, are formulated with low moisture-retaining coatings and manufactured to contain low levels of hydrogen. Hydrogen-controlled electrodes minimize risk of hydrogen-induced cold cracking when welding high-tensile steels on restrained structures. Fabricators use these electrodes to reduce or avoid the need refillableairtank for pre- or postweld refillableairtank and refillableairtank heat treatment to drive hydrogen from weld metal. Weldmetal diffusible hydrogen content varies from 1 to 16 ml/100 g. Optional designators H16, H8, and H4 set decreasing limits on hydrogen content in deposited weld metal. An optional electrode designator, ''R'', indicates an electrode that is moisture resistant; it will not absorb water in excess of a specified limit after exposure to humidity. Low-hydrogen electrodes should be used in dry condition and may require baking after exposure to the atmosphere. A diesel-powered, high-pressure air compressor is rated at 1,100 cfm and has a pressure range from 150 to 350 psi. The self-contained, 100% oil-free compressor has a "save all" base that eliminates fuel spills and oil leaks, making it one of the most environmentally friendly high-pressure units available. The diesel-driven engine stays well within the boundaries of the EPA and CARB emissions regulations. A complete line of accessories for the compressor is also available, ranging refillableairtank from aftercoolers to --40[degrees]F desiccant dryers and filters. Air compressor manufacturer, P.K. Lindsay, Deerfield, N.H., has been sold to American Eagle Accessories Group, Garner, la., a division of Stellar Industries Inc. The Lindsay air compressors are sold under the Lindsay and E.L. Smith brand names. All Lindsay compressor assets have been moved to American Eagle''s Garner plant and resumed full production. American Eagle is also a distributor refillableairtank of various truck-related accessories. According to the company, the FRL series of compressed air filters, regulators, lubricators, and manual control valves provides efficient moisture and contaminant removal, accurate pressure regulation, and precision lubrication for all air-operated equipment applications. All of the components in the series are available individually or in combination units. According to the company, its compressed-air productivity tools cut energy costs by as much as 70%, while reducing the compressor burden and shop noise levels. A 24-pg application manual shows bow these accessories provide solutions to spot chilling (to -40[degrees]F), dry machining, blow-off, control cooling, air conveying, static, liquid transfer, and spill pick-up. The products meet refillableairtank OSHA noise and dead-end pressure requirements. Welding shops require many types of equipment, including power supplies, guns, torches, wire feeders, flux-handling devices, and accessories such as cables and ground clamps, as well as consumables-filler metals, fluxes, and shielding gases. For brazing, shops employ furnaces and custom-built fixtures. Searching for accessories for your air compressor? We offer the best selection of cheap air compressor accessories on the internet. Check out our website for great deales on all of our air compressor accessories!
|